Phone:086 18576671093
In the rigid printed circuit board (PCB) world, you can easily generate a quote with cookie cutter specs, such as 0.062” thick, with FR4, green soldermask, and white silkscreen. With those standard specifications, you could quote a huge number of rigid PCBs.
Now try to do that with flexible PCB or a rigid-flex design. The specifications may look something like, 0.005” thick, with coverlays, adhesive polyimide, stiffeners, PSAs, white silkscreen and ENIG Finish. What we’ve seen in our experience is the provided specifications sent in by customers are not enough to provide an accurate quote. We want to help our customers succeed, and we want to build quality parts for them.
In this blog post, we will identify some of the variables that can affect pricing and delivery when manufacturing flex and rigid-flex circuit boards.
Flexible printed circuit boards often have stiffeners, which can be fabricated form polyimide, FR4, or stainless steel. They have coverlays or flexible soldermasks. They may be a flex-only design or a rigid-flex design. They might have flex sections that do not need to flex with rigid stiffeners underneath. You may also find flexible circuits that need to bend once or flex that needs to bend dynamically all the time over and over.
Rigid circuit boards are generally thicker than flexible circuit boards as they do not need to bend. Where a flex PCB may be only 0.007” finished thickness, many rigid boards are 0.062” thick built with FR4. Because flexible circuit boards are made of polyimide, which bends easily, stiffeners are many times required to aid in assembly. This extra step of processing should be included on the quote.
Coverlays are required to protect the signal circuitry. Coverlays are also made of polyimide. If tight SMTs are present in the design, flexible mask can be used selectively in place of coverlays, although it is less flexible. When submitting a quote, you must also include whether the design is just a flex PCB or a rigid-flex design. A rigid-flex circuit board design is a combination rigid design, plus a flex area consisting of the thin polyimide areas.
Understanding the differences of these additional requirements of a flexible circuit is critical to not only getting an accurate quote, but it allows for a high-quality product to be manufactured without any issues during production.
When specifying stiffeners in your flexible circuit board design, there are a couple of items to remember. What stiffener material will be used and what is the thickness?
Stiffener Material & Thickness:
Standard FR4 = 0.008” – 0.08”
Standard Polyimide = 0.001” – 0.008”
Standard SUS=0.004"-0.024"
If your part requires any type of special requirement (see items below), these need to be identified during the quoting process. Some of these additional items can increase the cost of your part, the lead time, or both.
Your flexible PCB design may require a pressure sensitive adhesive (PSA) or simply a double-sided tape for assembly mounting, We typically use 3M 467, Tesa 8853 , Tesa 8854 and 3M 9077. These special requirements are not just items listed on a quote, but require additional processes, as the PSA is manually added during the production of these parts.
Polyimide stiffeners are also manually added during the production process. Every time a manual process is required during the production processes, more time is required, and this can increase the cost and lead time.
In some cases where the flexible circuit requires shielding, there are silver ink shields (or shield films) applied on the circuit boards. This process is used to lower radio frequency (RF) electromagnetic (EM) interference in the design. This interference can be detrimental to a designs reliability, even to the point of an assembly becoming nonfunctional.
Controlled impedance is a critical feature of many designs. Trace pairs must have a consistent width and spacing to each other to have the correct resistance measured in ohms. In flexible circuit boards, just as in rigid circuit boards, controlled impedance traces must refer to ground planes. A flex PCB also needs an extra layer of polyimide core added in between an impedance layer and its corresponding reference plane layer. Basically, this means we need 2 sheets of polyimide instead of 1. This not only adds to the cost, but it is a necessary part of these kinds of builds.
With flex, we do have standard pattern plating where the entire artwork image gets plating plus in the holes. But, we have quite a few designs that get pad plating. That is selective plating that only plates the SMT areas and very little in the holes. Pad plating is very good for controlled impedance boards or boards that need to be very flexible.
Common board surface finishes for flexible PCBs include HASL, ENIG, gold, and immersion silver. The best finish for flexible circuit boards currently is ENIG. It is a thinner, more flexible finish for assembly. Gold finish is OK as well, but usually should be specified as gold flash, which because it is thinner. It is more flexible than a full hard gold plate, which would not be flexible.
